The portable pull rod battery is a portable and efficient charging product designed specifically for car charging. It uses a high-capacity battery with a power output of 3600W to provide fast charging services for cars.
The product has the following features and functions:
1. Portability: The product is designed as a pull rod, equipped with wheels and handles, which is convenient for users to carry and move. Easy to carry and use at home, in the office or on the go.
2. Efficient charging: The product is equipped with high-capacity battery, which can provide 3600W power output, and can quickly charge the car. Whether it's charging the battery or starting the car, it can be done efficiently.
3. Multi-function: In addition to charging the car, the product also has a
variety of functions. It can be used as a mobile power supply to provide charging services for other electronic devices such as mobile phones and tablets. At the same time, it also has an emergency start function, which can provide emergency start power when the car cannot start.
4. Safety protection: The product is equipped with multiple safety protection measures, including overcharge protection, overdischarge protection, short circuit protection, etc. These protection mechanisms can ensure safety during use and avoid potential risks and dangers.
5. Reliability: The products use high-quality materials and advanced manufacturing processes, with good durability and reliability. It has undergone strict quality control and testing, and can run stably for a long time
Product function and performance
| Item | MIN. | STD. | MAX. | Description |
| Cell type | | Lithium iron phosphate | | |
| Voltage | 40V | 51.2V | 58.4V | |
| Capacity | 55.1Ah | 60Ah 3072Wh | | Ambient temperature 25±2℃; capacity of Battery Pack at factory delivery: discharged at 0.5C ≥55.1Ah (capacity measured after charged at constant current of 0.5C to 55.2, and then down to at 0.2C to 58.4V; current is cut off at 0.02C, and then discharged at 0.5C to 40V) |
| Battery pack low-voltage protection | | 2.75V | | Discharging is ceased when the battery pack voltage is lower than 2.75v±0.1/cell, and delayed for 2s |
| Charging over-temperature protection | 47℃ | 52℃ | 57℃ | Charging is ceased (under the control of main controller) when cell temperature is above the limit value. |
| Resumption from charging over-temperature protection | 44℃ | 49℃ | 54℃ | Charging is resumed (under the control of main controller) when the temperature is back within the limits after the over-temperature protection. |
| Charge low-temperature protection | -5℃ | 0℃ | 5℃ | Charging is ceased (under the control of main controller) when cell temperature is below the limit value. |
| Resumption from charging low-temperature protection | -3℃ | 2℃ | 7℃ | Charging is resumed (under the control of main controller) when the temperature is back within the limits after the low-temperature protection. |
| Discharging over-temperature protection | 60℃ | 65℃ | 70℃ | Discharging is ceased (under the control of main controller) when cell temperature is above the limit value. |
| Resumption from discharging over-temperature protection | 55℃ | 60℃ | 65℃ | Press the button to resume discharging (under the control of main controller) when the temperature is back within the limits after the low-temperature protection. |
| Discharge low-temperature protection | -10℃ | -15℃ | -20℃ | Discharging is ceased (under the control of main controller) when cell temperature is below the limit value. |
| Resumption from discharging low-temperature protection | -5℃ | -10℃ | -15℃ | Press the button to resume discharging (under the control of main controller) when the temperature is back within the limits after the low-temperature protection. |
Characteristics of intelligent Paralleling | ITERM | MIN | STD | MAX | Description |
| Intelligent paralleling interface | |
2 pieces | | |
| Number of intelligent parallels | | | 4 piece | One port can be connected to two intelligent battery packs, that is, a main unit can connect four intelligent battery packs. |
Charging | | Available | | The main unit will be charged preferentially, and an external high-capacity paralleled intelligent battery pack will be charged subsequently. |
Discharging | | Available | |
The intelligent paralleled battery pack will be discharged preferentially, and the main unit battery pack will be discharged subsequently. |
Paralleling Description | | | |
1.The main unit will reserve 3% of its battery level when connected to an intelligent paralleled battery pack. 2.Before connecting, turn off the output, cease charging, and then start the main unit for charging or discharging 3.An intelligent paralleled battery pack shall not be disconnected during its normal operation. |
Approved Certification or Testing Standards The following certification or registration are be provided on customer's demand: UL2743/FCC/UN38.3 Full /MSDS/UN box performance sheet/dangerous package certification, at the customer's cost.
| Certification Items | Certification Governing Standards |
| FCC-SDOC | FCC 47 CFR Part 15 Subpart B: 2022 |
| FCC-ID | FCC Part15 Subpart C, Paragraph 15.209 |
| UL2743 | UL 2743. Edition 2. Revision 2020 |
| UN38.3 | ST/SG/AC.10/11/Rev.7/Amend.1 |
Physical Parameters of Product
: 563mm× 372mm× 423mm, 2mm
Maximum sizes of main unit: 563mm (L) x 372mm (W) x 423mm (H), ±2mm
:≈46KG
Weight of main unit: ≈46KG
Packing list
| NO | Name | Specification | QTY |
| 1 | F3600PXIM | 3600W/3072Wh | 1 |
| 2 | User manual | F3600PXIM: 142*210mm | 1 |
| 3 | AC cable | SF-31+SF-82S SJT 3X 14AWG 125V/15A Three-pin plug with UL certification in accordance with USA standards | 1 |
